Deskripsi pekerjaan
Programming PLC and HMI based on control philosophy, logic matric, sequence, and flow chart system to maximize solution
Tanggung jawab: Prepare and review engineering documents for PLC, DCS, HMI, and instrumentation replacement or modification; Perform PLC, DCS, and HMI programming, migration, configuration, and system modification; Execute calibration, testing, and troubleshooting of field instruments and control devices; Coordinate and carry out dismantling, installation, loop checking, commissioning, and system start-up at the project site; Prepare progress reports, technical documentation, as-built documents, and deliver technical training to users; Qualifications; Bachelor’s degree in Engineering Physics, Electrical Engineering, Instrumentation, Automation, Mechatronics, or a related field; Minimum 4-5 years of experience in PLC, DCS, HMI, and instrumentation projects, experience in the oil & gas industry is highly preferred; Hands on experience in PLC/DCS programming, instrument calibration, loop checking, testing, troubleshooting, and commissioning; Able to understand P&IDs, loop diagrams, instrument datasheets, I/O lists, control logic, and system architecture; Familiar with field instruments such as pressure, temperature, flow, and level transmitters, control valves, switches, and related devices; Willing to work at project sites and perform both project coordination and hands on technical activities; Placement Duri, Riau.
Tanggung jawab
- Prepare and review engineering documents for PLC, DCS, HMI, and instrumentation replacement or modification
- Perform PLC, DCS, and HMI programming, migration, configuration, and system modification
- Execute calibration, testing, and troubleshooting of field instruments and control devices
- Coordinate and carry out dismantling, installation, loop checking, commissioning, and system start-up at the project site
- Prepare progress reports, technical documentation, as-built documents, and deliver technical training to users
- Qualifications
- Bachelor’s degree in Engineering Physics, Electrical Engineering, Instrumentation, Automation, Mechatronics, or a related field
- Minimum 4-5 years of experience in PLC, DCS, HMI, and instrumentation projects, experience in the oil & gas industry is highly preferred
- Hands on experience in PLC/DCS programming, instrument calibration, loop checking, testing, troubleshooting, and commissioning
- Able to understand P&IDs, loop diagrams, instrument datasheets, I/O lists, control logic, and system architecture
- Familiar with field instruments such as pressure, temperature, flow, and level transmitters, control valves, switches, and related devices
- Willing to work at project sites and perform both project coordination and hands on technical activities
- Placement Duri, Riau
Informasi lowongan
- Tipe pekerjaan
- Full-time
- Gaji
- Negosiasi